The creation of Clinical pathologic coorelation Research Paper - 1

The creation of Clinical pathologic coorelation - Research Paper Example The speaker should seek an expert from the faculty with whom to discuss the case. In addition, the most preferred is the care-taker that cared for the patient, and the attendance of the faculty member to the CPC is highly encouraged. This work describes what Clinical Pathologic Correlation consists of and how it is made in the context of Cytopathology (OECD 484). The start of the conference focusses on the history of the patient and physical examination. The pictorial photographs of the examination research findings, like skin rashes or even other visually-based physical findings, are allowed and encouraged. However, the patient in question has to avail consent for the photograph, and the given photograph does not identify the patient. The examination history and physical findings should arise to the discussion of a particular differential diagnosis. The next thing that follows is the objective data. The CPC have to include laboratory data and information, images of medication, and/or specimens of pathology (Görlitz et al 79). The speaker is supposed to outline the rationale for the proposed work-up tackled. This in turn should be followed by the data plan correlated with the performed differential diagnosis, which includes a basic explanation of the way the data plan assists to display further the differential diagnosis. The CPC should terminate with the patient’s diagnosis being identified together with a discussion based on the evidence of the performed diagnosis in relation to the epidemiologic, therapeutic, and diagnostic details concerning the disease process (Australian Institute of Health and Welfare 158). Lastly, the speaker will then field questions arising from the attendees. In a situation where the faculty expert is attending the CPC, their comments are also highly encouraged. Rapid On-site Evaluation (ROSE) in Cytology is a special service

Factors affecting inflation rate Bahrain Assignment

Factors affecting inflation rate Bahrain - Assignment Example Throughout the globe, significant gains were made in fighting against increased inflation during the 1990s and there was hope that a new period of low inflation had started. Countries in Europe and Latin American succeeded in fighting inflation from higher digits to single digits, and maintaining the stability of prices of consumer goods and services. In 2000, increased inflation started to haunt the world but it was stopped in 2009 by the financial crisis (Calvo & Carmen, 2002). This paper discusses factors affecting the rate of inflation in Bahrain. Inflation in Bahrain is driven by many factors and the exchange and interest rate laws that central bank in Bahrain implement, and the supply of money. In Bahrain, the prices of goods especially food prices affect the inflation of Bahrain. This is because increase in prices of foods and beverages implies that the country would have increased inflation this is because transportation of such goods to the markets will be costly. Further, t he increase in prices of fuel implies that the prices of food stuffs increase since high prices of fuel controls the market. It is important to note that the prices of commodities are affecting the rate of inflation in Bahrain because commodities in Bahrain are widely imported and all prices of imported goods affect inflation. However, from the calculations, it can be deduced that changes in commodity prices are not just a proxy for changes in the entire import prices (Calvo & Carmen, 2002). From the data presented, it is rational to argue that another factor affecting inflation in Bahrain is the inflation in previous years. For instance, the momentum of inflation on goods such as foods and beverages and services such as medical care is well recorded and they result because of factors that incorporate overlapping contracts and adaptive inflationary expectations. Further, the growth of money in Bahrain because of paying utility bills such as rent, electricity and water has a direct e ffect on inflation of Bahrain since there is no purpose to expect important changes in the money velocity. It is also significant to note that the growth rate in Bahrain is influencing the rate of inflation in the sense that it is affected credit issues whereby increase in the growth rate of Bahrain has negative impact on inflation. The central bank played a very important role by decreasing the growth rate to about six percent in the year two thousand and eight. The market was very stable in that prices of commodities such as food, beverages, tobacco and services such as medical care were affordable. This in turn increased the market value of these goods and services (Chen & Scott, 2004). The trend of the economy of Bahrain affects her inflation. For instance, from the calculations, the trend in Bahrain revolves at the rate at which the world market is directed in that it sets its prices in comparison to other countries. For instance, the U.S economy is in direct contact with the e conomy of Bahrain. This illustrated that the movement of the trend was downward. This in turn shows that, the economy of Bahrain is positively affected rather than being negatively affectively which reduces inflation rate. Since inflation is defined as the increase in buying power of money, the easiest way to calculate the rate of inflation is by listing the prices of services and goods over the stated years commonly known as the price

Characters in Glass Menagerie Essay Example | Topics and Well Written Essays - 2000 words

Characters in Glass Menagerie - Essay Example The characters could be entertaining, spiteful or even painfully confusing but understanding their characters, circumstances, fears and longings, can make readers understand why they act and talk as they do. In this paper, an in-depth study of the three main characters will be done and an attempt to explain the reasons for their words and actions will be undertaken in the hope that readers will come to understand further the motives of the characters or understand the characters themselves and a little background of the author will be included to connect him to his characters. Amanda Wingfield is a beautiful woman who had a number of suitors during her younger days. She seems to be greatly indulged with her past, oftentimes speaking about her glory days (deafed.net) to her children which made her son, Tom, quite tired about it as reflected in his conversation with his sister, Laura. When their mother told them about her suitors when she was young, Tom mentioned he knew what was comin g but his sister told him to let their mother tell her story anyway and Tom answered, â€Å"Again?† (Williams, 754). Understandably, every person would want to talk about the good old days. They somehow help ease the pains of living a bitter present (Debusscher). For Amanda, she seems to go back to her past (Cummings), refusing to believe or accept the fact that she was not receiving suitors for her only daughter who was already growing old. She perhaps wanted to think that there is no reason at all for her daughter not to receive gentleman callers because she received so many of them during her youth. It would be an insult to a mother for her daughter not to have any suitors especially to a woman who seems to take pride in her beauty. For her, the implication that her daughter is not beautiful enough to attract suitors is simply unacceptable. In addition to a mother’s pride, Amanda’s desire to see her daughter married to a responsible man seems to make her very anxious about the young maiden’s having no boyfriend. She is concerned about the health conditions of her daughter and she probably was already considering her future if she remained unmarried. She wanted her daughter to be married very soon and she wanted that very badly because she knows it would only be a responsible husband who could assure her daughter of a good future. She knows how it is to be a helpless individual, unable to provide even for the basic needs of the family. That is why, even though they are not really the affluent kind of family, Amanda did her best to put her daughter in college for her to have something to lean back on during difficult times, for her to become independent in the future. However, the weak character of Laura (which will be discussed in detail later) did not make Amanda’s wishes come to pass. To some, Amanda may seem to be a manipulative mother who is trying to let her children do things which she was not able to do when she was young. Nevertheless, on another angle, she is seen as a mother who wants only the best for her children. With her husband leaving her alone to take care of the children, Amanda has experienced grievous days and perhaps, she was just trying to keep her children away from such unfavorable circumstances. Considering that Amanda asked her son to look for a responsible caller for Laura, someone who did not drink liquor but was an opposite of her own husband, shows that she indeed did not

Air Solutions Case Study Example | Topics and Well Written Essays - 1250 words

Air Solutions - Case Study Example We offer specialist capabilities and product ranges to meet the specification of complete air systems installation and pipeworking as well as for hydraulic systems, vacuum pumps and ancillary equipment.2 Keeping in sync with technology is of utmost importance to any industry, especially in the consumer industry. Air Solutions made major improvements in industrial air compressors within four years of its launch by the company in 1994.Similarly, in the case of HACU (Heavy duty air conditioning unit), the product was updated in 1996, eight years after its launch in 1996.This was accompanied by a massive advertising campaign. There were minor design changes in 1999, to improve the product. Thus, Air Solutions has been keen to match up to consumer preferences and update its products even before the standard ten-year operating life for which the product has been designed. The company believes in catering to well-informed consumers and spends on advertising campaigns about new product launches. A constant sales figures of 12000 units of IAC and HACU per annum prove the constant demand for these products. Providing timely and necessary service support also form a key deciding factor while a consumer researches and zeros in on the company to buy the product from. Consumer service, not only before or during the sale of the product, but also after sales service play a vital role in determining the reputation and sales volumes of the company's products. While supply of spares and post sales support can provide an additional business opportunity, it might be a drain on the reserves and logistics of the company. Typically, engineering, especially air conditioning companies introduce a product with an anticipated operating life of ten years. However, due to various market factors, these might sometimes be used for more than thirty years. Now, if the product is more than ten years old and has been replaced by a newer version, then there is little that a spares and support system can do to help the customer. Oftentimes, the cost of replacing the spares is a massive proportion of the cost of the product itself. In such a scenario, the customer might be advised to go in for a new product itself, instead of trying to repair the existing product. According to the leading website on air-conditioning, heaters and refrigerators, "Variable Frequency Drives Running on Bypass Can Waste 56 Percent or More Energy for Your Air Handling System. Despite the economic advantages and significant energy savings available by using AC variable frequency drives (VFDs) in HVAC applications, many building operators do not repair or replace drives when they fail since the motors can easily continue to run through a bypass contactor. While this is a great solution for short-term outages, continued operation in this mode quickly becomes a very expensive way to operate a fan."1 Strategy The strategy to make the most of the spares and sales support department would be to: (i) Strategically locate these warehouses Proposed Locations: Manchester, Birmingham, London, Singapore, Europe, U.S, Africa 1) at the site of production of IAC and HACU ie. one at Manchester and another at

Mentoring Assignment Example | Topics and Well Written Essays - 1000 words

Mentoring - Assignment Example Mentors help people to solve their problems at work and out of the office as well. Being capable to manage their life, people feel empowered to do more than they usually do. As a result, they show greater performance and experience fewer difficulties while copying with new tasks or carrying greater responsibility than they used to have. Mentors use their personal example to show that their interventions work perfectly well for them in their life. For instance, if a friend gives a piece of advice, it does not mean that this friend acts the way she or she advices in real life. Everything is different with mentors because they believe in what they say and act accordingly. Usually, such examples are very inspiring because if someone can handle everything, other people can also life effectively. Climate of trust is very important for mentor-mentee relationships because only in this way mentors can effectively help their clients to succeed. In order to create relationships of trust, mentors should be understanding and show positive attitude to the mentee. Also, mentors need to share information with their mentees; they need to provide their personal information as well in exchange for their same information about their mentee. In order to work effectively together, mentor and mentee need to facilitate agenda and define long-term and short-term goals they need to set during their sessions. This agenda is necessary because it directs work and makes it clear why certain things need to be done. Set goals and solve problems is possible only when people share information about their past and present. Some problems appeared to have place in the past and their consequences can negatively influence mentees life. On the other hand, mentor can understand mentee better if she or she knows the background of this person. Obviously from the title, traditional one-to-one mentoring is the most frequently met mentoring model. It is

Distance education comparing 2 educationalinstructional websites for Essay

Distance education comparing 2 educationalinstructional websites for use of medium - Essay Example Within the context of the stated, the IHEP (2000) examined existing benchmarks, guidelines, and principles that addressed quality online learning. The examination resulted in a list of 24 benchmarks that are deemed essential to quality online distance learning. Proceeding from the above stated, this research will evaluate two distance learning programs using the 24 benchmarks referred to in the above. This analysis will show that even though Phoenix University's online programs are very well developed, they fall short of Athabasca's. Benchmarks and recommendations for online distance learning were developed by many sources (ADEC, 2001; AFT, 2000; IHEP, 2000). The guidelines represent institutional and faculty controls over many aspects of distance learning and included: (a) program quality and standards; (b) faculty support; (c) student services; (d) evaluation and assessment; (e) role and mission of the university; (f) access to learning resources; (g) quality of faculty; (h) student interaction with faculty and peers; and (i) a comprehensive technology plan. The institutional support benchmarks were defined as: (a) a documented technology plan that included electronic security measures to ensure that the validity, quality and integrity of the information; (b) the technology was as failsafe and reliable as possible; and (c) the existence of a centralized system to maintain and support the technology infrastructure. As regards both Phoenix and Athabasca, no information was provided on either website regarding institutional support. 2.2 Student Support According to the MEP 2000 student support benchmarks for online distance learning were: (a) the availability of information about courses and programs; (b) hands-on training and information for students on the library and its resources; (c) the availability of technical support, instructions on technology, and tutorials; and (d) a system in place to quickly address student questions and complaints with regards to student services. As relates to Phoenix University, the website mentioned the factor of student support but did not clarify the type of support offered. In direct comparison, Athabasca emphasised technology orientation courses, program orientation courses and additional training and support for all enrolled students. 2.3 Online Course and

Separation of Mixtures of Solids Lab Report Example | Topics and Well Written Essays - 750 words

Separation of Mixtures of Solids - Lab Report Example As can be seen, the total weight of the mixture’s components after separation was less than the initial weight of the mixture. Specifically, a total of 39% of the weights were lost during the experiment. The calculation of which is elaborated below. CALCULATIONS The calculation of the percent loss was as follows: CONCLUSION/DISCUSSION As demonstrated, separation of a mixture of solids into its components can be done by taking advantage of the innate differences of the characteristics of each of the components. Iron is the only metal component of the four, and this was taken advantage of in the use of magnet. By exposing the mixture to the magnet, it was ensured that only iron fillings would be able to attach to the magnet. On the other hand, unlike sand, benzoic acid and salt are both water soluble, and their solubility was increased by heating the solvent, ensuring that benzoic acid and salt can be dissolved. Next, since benzoic acid is less soluble than salt, it crystallized at cooler temperatures of the aqueous solution. The salt was then transformed back to its solid form by allowing water to evaporate (Masterton and Hurley, 2004). QUESTIONS A. How did your proposed procedures or flow charts at the beginning of this experiment compare to the actual procedures of this lab exercise? In my proposed procedure, I planned to separate the salt and benzoic acid instead by adding water and boiling the mixture. The resulting solution will then be cooled to precipitate out the benzoic acid, and the remaining liquid will be allowed to evaporate until only the salt remains. To the remaining mixture of supposedly iron and sand, it will be exposed to a magnet to attract the iron and leave the sand behind. B. Discuss potential advantages or disadvantages of your proposed procedure compared to the one actually used. Although the principle is the same, I feel that my proposed flowchart poses some disadvantages as that compared to the instructions. First, boiling water may have corrosive effects on the iron, making them weak enough to break into pieces that may contaminate the sand that will remain after all the separation techniques. Second, the weight of the iron may be overestimated, as it may get wet because of the exposure to liquid that might not be totally dried out during the procedure. C. How would you explain a sand recovery percentage that is higher than the original sand percentage? Sand, especially when it is composed mostly of clay, tends to sip in water that may add onto the weight of the sand. D. What were potential sources of error in this experiment? What I think mostly contributed to the relatively large percentage loss was the weighing. Probably, a few particles remained on the weighing dish every time weighing was done during the experiment. Thus, all of the components were most likely underestimated in this experiment. Other sources of error include not completely drying out the water before weighing the solids; not complete ly magnetizing out the iron, overestimating the weight of sand; not completely precipitating out benzoic acid when the benzoic acid + salt solution is exposed to cooler temperatures, thus underestimating the weight of benzoic acid and overestimating the weight of salt; and not completely evaporating the fluid, thus overestimating the weight of salt. References Masteron, W. L. and Hurley, C. N. (2004). Chemistry: Principles and Reactions. 4th ed.